Products

PROPERTIES Screenstrip Liquid is a stencil de-coating product which can be used on Nylon, Polyester and stainless steel meshes. It is supplied as a dilatable liquid concentrate. Ideal for manual use or in automatic screen cleaning machines - will not block or corrode nozzles. Pour Screenstrip Liquid into a plastic bucket and add 20 liters of water to obtain the optimum diluted strength.

Screenstrip Powder is a stencil de coating product which can be used on Nylon, Polyester and stainless steel meshes. It is supplied as an easily diluted powder.

Features: - For the removal of ink residues and mesh stains, - Use with screenpaste helps remove ghost images and other stains caused during screen printing. - Enhanced performance when use with Screenpaste

 

•  Clean both sides of the screen with a rag soaked in Screensolve to remove all ink residues.
•  Rinse off the screen with water to remove the solvent.
•  Apply Screenstrip solution on the both sides of the screen.
•  For stubborn stains, reapply the Screenstrip solution and then rinse the screen with water.

Screenstrip Gel is a decoating agent suitable for the removal of emulsions and non-gelatine based films. It is supplied ready to use and can be used on nylon, polyester and stainless steel mesh. Screenstrip Gel is particularly useful for decoating large areas as it will not drain off if the screens are left in a vertical position and normally requires only one application. Screenstrip Gel can also be used to decoat small areas if stencil corrections are required.

Screenfix is a two pack screen mounting adhesive, formulated for fixing nylon, polyester or metal fabrics onto wood, steel, aluminum or painted metal frames. When fully cured, this adhesive is highly resistant to all solvents typically used in the screen printing process. It is very easy and economical to use and has a long uncatalysed pot life. MIXING Screenfix is a two pack system product with the following components: Part A: Screenfix (SFF-188R) Part B: Catalyst (SFF-188CA)

Ghost Remover Screen (SR-G419) is a brown colored aqueous paste of abrasives and surfactants containing a mixture of alkali and solvent. Screenclean is fast acting and highly effective at removing ghost images and stain on all types of mesh.

1. Clean off all ink residue prior to stencil removal.
2. Remove stencil with recommended chemical product.
3. Apply a small amount of Ghost Remover Screen (SR-G419) to both sides of the wet mesh with a brush, thoroughly covering the stained areas in a circular motion.

Screen-clean (SC771) is a grey colored aqueous paste of abrasives and surfactants containing a mixture of alkali and solvent. Screenc-lean is fast acting and highly effective at removing ghost images and stain on all types of mesh.

Degreaser Plus P-4419 is a liquid suitable for removing greasy stains, dust and dirt from all types of mesh. It will also wet the surface of the mesh improving the coating of the emulsion and reducing pinholes. Degreaser should be used prior to the stencil making process. New screens should be treated with Screenprep before degreasing.

HDT-001 Fixing Hardener is a solution for increasing the water-resistance of direct photostencils. It is designed for use with polyester mesh and is not suitable for nylon mesh. Stencils that have been treated with HDT-001 can be decoated, although they will be more difficult to remove.