Products

This kind of paste is of good hand feel, flat foaming, good fastness, easy to print Property: Appearance: beige slurry paste Main material: Acrylic co-polymer. Viscosity: 140000-150000cps. PH value: 6.5-7.0 Non-ion Storage: at 5-40℃, but should well sealed. Avoid direct sunshine.

• Good fastness. Washing at 60℃ for 2 hours no crack and peel off happened.
• Foaming Paste: 30% white Paste 30% Clear Paste: 30%

Gloss paste/ silver shatter paste Introduction To be composed by acrylic resin, with good gloss, good fastness, good hand feel, it can be used for glossing printing result, it can be also used for coating at the surface of golden silver shatter paste, this will not cause the peel of and  laminating. Application 1: 16-24 mesh is suggested when printing, to select the mesh based on different pattern. 2: Normal printing will be  one time by come-and-go for, for better gloss result, 2 times by come-and-go is suggested, after naturally dry to hot press at 140-150℃ for 10 seconds.

*Specification: For Clothes, Cotton 100%, Poly/Cotton, Satin & Non-woven fabric *Character: Excellent Coverage, Good adhesion and soft Touch. Anti-Wash   *Guarantee Period: 3 years at 0>40℃ with special retarder. Thinning and Cleaning

• Stir well before use.
• JNW inks do not need to be thinned before printing, but if the ink viscosity is too high, 2-3% CH-MST1/W retarder for water base can be added printing.

• Clean the screen with water immediately after printing. Do not allow the ink to dry into the screen. For heavy ink stains,