Products

SABINECOLORS The low mesh count 100% MONOFILAMENT POLYESTER screen printing mesh has high tension and low elongation, with excellent tear resistance and dimensional stability, its mesh count screen are ideal for glitter or inks, as these inks contain particles that can't pass through finer mesh. It is widely used for textiles, PCB, etc printing.

SABINECOLORS The low mesh count 100% MONOFILAMENT POLYESTER screen printing mesh has high tension and low elongation, with excellent tear resistance and dimensional stability, its mesh count screen are ideal for glitter or inks, as these inks contain particles that can't pass through finer mesh. It is widely used for textiles, PCB, etc printing.

SUBSTRATES Soft PVC, acrylics, paper, wood and imitated nylon.   END USES Ait-charged toy, manmade leather products, plastic commodity, shoes, cap, ball, travel bag.

• can be printed through any type of mesh, but for the best printing results it is recommended that Monofilament mesh, 60-120T is used.
• SQUEEGEE 65-85 durometer solvent resistance blade, such as PU COVERAGEApprox. 30㎡/kg under 100T mesh   CURE Force to dry with hot air dryer below 60℃ is allowed.

The SW- G PVC series of screen ink carries a wide range of opaque colors and its gloss finishing is very suitable for high quality jobs. This ink series exhibits excellent adhesion on a wide variety of substrates. Application

• PVC: Rigid, Flexible and Self-Adhesive
• Acrylic, Crystal Polystyrene and ABS
• Polycarbonate
• Metalized Foil
• 1Kg of ink will print an area of approximately 55-60 square meters with 120 – 34 threads / cm. Mesh count monofilament polyester or nylon and 10% dilution.

SUBSTRATES Soft PVC, acrylics, paper, wood and imitated nylon.   END USES Air-charged toy, manmade leather products, plastic commodity, shoes, cap, ball, travel bag. SQUEEGEE 65-85 durometer solvent resistance blade, such as PU   COVERAGE Approx. 30㎡/kg under 100T mesh   CURE Force to dry with hot air dryer below 60℃ is allowed.

GVY Can be printed on PVC plastic, polycarbonate plastic, acrylic and CAB. The ink surface is highly flexible. and chemical resistance, quick drying and has a high gloss, resistant to light and weather conditions   Finish Gloss Ink Type One Pack / Solvent-Based Drying : Jet dry : 55-65 C 15-20 seconds ํ.  Air dry : Not over 10 minutes   Thinning 10-15 % Thinner 5099, 5-10 % Thinner 2938, Hot shop condition 10-15 % Retarder 2939