Products

Scratch Removable inks are opaque inks which can be printed over offset printed lottery tickets and promotional card; they can be easily removed with a coin or fingernail to display the pre-printed message underneath. SR35 inks can be printed onto PVC or paper and have a satin finish.  

• SR35 can be printed through any type of mesh, but for the best printing results it is recommended that monofilament 62-64 to 77-48, depending on the detail required.
• SR35 can be printed through a variety of solvent resistant stencils, such as Universal Diazol PU220, Diazol S42 & Polyzol Direct DE-422

Etch Resist Blue (EBI-120) which is commonly know as Circuit Blue is designed for the use as etching resist in printed circuit industry. The air / thermal dried polymer shows a semi-matt finish. The etch resist can be dried at room temperature of about 25-30 ^o C for 2-4 hours or can be dried in a convection oven at 80-100 ^o C for 15-20 minutes with good air circulation. A medium hard (60-65 shore) Polyurethane squeegee is recommended.

NYL is an easy-to-dry; one/two pack ink suitable for direct printing onto a variety of nylon fabrics. When completely dry, the highly opaque ink film has excellent flexibility, adhesion and wash fastness. To enhance the adhesion, it is recommended that NYL be mixed with the appropriate amount of catalyst (see section on Catalyst).

• NYL can be printed through any type of mesh, but for the best printing results it is recommended that P36-90 to P61-64 be used. For flat bed textile printing with a large number of fibers/unit, P71-55 to P110-34 mesh should be used. This will give finer prints, but the opacity will be reduced.
• NYL inks are suitable for both manual and automatic screen-printing.
• NYL can be printed through a variety of stencils, such as Diazol Universal PU710, Diazol TX600 and Polyzol DE 622
• 1Kg of ink will print an area of 12-16 m 2 through a P43-80 mesh.

NYE is an easy-to-dry, one/two-pack ink suitable for printing onto a variety of nylon (including many which have been treated for water resistance), polyester and some other synthetic fabrics. When completely dry, the ink film has excellent flexibility, adhesion and wash fastness. To enhance the adhesion, it is recommended that NYE be mixed with catalyst (see section on Catalyst).  

• NYE can be printed through any type of mesh, but for the best printing results it is recommended that P43-80 to

P61-64 be used.

• NYE inks are suitable for both manual and automatic screen-printing.
• NYE can be printed through a variety of solvent resistant stencils, such as Diazol Universal PU (220),

Diazol TX(600) and Polyzol DE(442).

• 1Kg of ink will print an area of 22-26 m 2 through a P61-64 mesh.

Medium drying and gloss ink, excellent opacity, qualities with good printability and anti-blocking. Excellent adhesion to water-proof nylon. Monofilament mesh, 60-120T.   SQUEEGEE 65-85 durometer solvent resistance blades, such as PU   COVERAGE Approx. 30㎡/kg under 80T mesh  

Modifiers/solvents… SUPRA Clear Extender & Colors Base increases puff height and facilitates difficult color matching. Generally, SUPRA does not require thinning.

PTN is a plastisol ink which can be used for direct printing on fabrics and iron-on transfer printing. These plastisol inks have excellent screen stability, high opacity and color brightness and excellent wash resistance-for both directly printed fabrics and transfer printed ones. PTN has good adhesion to a variety of fabrics giving a print with a soft feel. PTN inks are suitable for printing fabrics made from natural fibres such as cotton and wool as well as synthetic ones. Compatibility with the textile should be carried out prior to use.

(PRN11) Plastisol 3D Resin has been developed for the thickening luster finishing of printing made of Plastisol inks, such as PC, OC, EL series color inks etc... (PRN11) is one kind of (polyvinyl chloride) Co-polymer hence it could be combined with any other Plastisol. Plastisol inks & gain glossy, higher transparent & thickening results, it could has super lustering, shiny, soft & elastic hand-touch results on printing fabrics.

PRJ80 Plastisol Ink-Jelly Binder has been developed for the thickening luster finishing of printing made of Plastisol inks, such as PC, OC, EL series color inks etc... PRJ80is one kind of (polyvinyl chloride) Co-polymer hence it could be combined with any other Plastisol. Plastisol inks & gain glossy, higher transparent & thickening results, like jelly. Because PRJ80 is similar with silicone rubber, it could has super lustering, shiny, soft & elastic hand-touch results on printing fabrics.

Paper covered with PET/BOPP film, rigid PVC, ABS, PP. General merchandise and publishing materials, such as food packaging, cosmetic, posters etc. Have good adhesion, flexibility, glossiness and flow capability to most of the matt paper and some of the gloss paper. MESH: Monofilament mesh, 120-152T, tensility 13-15 N/c㎡ SQUEEGEE: 65-75 durometer solvent resistance blade, such as PU COVERAGE: Approx. 35-40㎡/kg under 140T mesh CURE: By Ultra Violet curing machine, use 2 high/medium voltage mercury-vapor lamp at least 5KW to ensure sufficient UV power for curing.