Products

PROPERTIES Screenstrip Liquid is a stencil de-coating product which can be used on Nylon, Polyester and stainless steel meshes. It is supplied as a dilatable liquid concentrate. Ideal for manual use or in automatic screen cleaning machines - will not block or corrode nozzles. Pour Screenstrip Liquid into a plastic bucket and add 20 liters of water to obtain the optimum diluted strength.

SUBSTRATES:

Coated PET film, BOPP matte paper, Rigid PVC,ABS,PP plastic materials

 

FINISHED PRODUCTS:

Daily necessities and Stationery supplies such as package for Food, Cosmetic; Audio Visual Products and Magazine and pictorial.

APPLICATION INFORMATION: MESH: Monofilament mesh, 120T-150T mesh with 13-15N/cm2. SQUEEGEE: 65-75 rigid solvent resistance blade, such as PU COVERAGE: 35-40㎡/kg under 120T mesh

This kind of paste is of good hand feel, flat foaming, good fastness, easy to print Property: Appearance: beige slurry paste Main material: Acrylic co-polymer. Viscosity: 140000-150000cps. PH value: 6.5-7.0 Non-ion Storage: at 5-40℃, but should well sealed. Avoid direct sunshine.

• Good fastness. Washing at 60℃ for 2 hours no crack and peel off happened.
• Foaming Paste: 30% white Paste 30% Clear Paste: 30%

Gloss paste/ silver shatter paste Introduction To be composed by acrylic resin, with good gloss, good fastness, good hand feel, it can be used for glossing printing result, it can be also used for coating at the surface of golden silver shatter paste, this will not cause the peel of and  laminating. Application 1: 16-24 mesh is suggested when printing, to select the mesh based on different pattern. 2: Normal printing will be  one time by come-and-go for, for better gloss result, 2 times by come-and-go is suggested, after naturally dry to hot press at 140-150℃ for 10 seconds.

*Specification: For Clothes, Cotton 100%, Poly/Cotton, Satin & Non-woven fabric *Character: Excellent Coverage, Good adhesion and soft Touch. Anti-Wash   *Guarantee Period: 3 years at 0>40℃ with special retarder. Thinning and Cleaning

• Stir well before use.
• JNW inks do not need to be thinned before printing, but if the ink viscosity is too high, 2-3% CH-MST1/W retarder for water base can be added printing.

• Clean the screen with water immediately after printing. Do not allow the ink to dry into the screen. For heavy ink stains,

The SW-PY Series of screen ink is especially formulated for screen printing on pre-treated PE and PP packaging, where glossy finish and excellent chemical resistance properties are required. With recommended diluent, excellent screen stability enables the ink to be used on manual up to fully automatic printing machines, can be customize to suit most printing requirement Stencils : Solvent resistance direct photo emulsion DE442 or dual sensitized PU220 Universal photo emulsion, Coverage: Mileage of printing approximately 45 – 50 square meter per liter of ink with 120 T/cm ( 305 T / Inch ) mesh count monofilament Polyester or Nylon and 10% dilution.

SABINECOLORS The low mesh count 100% MONOFILAMENT POLYESTER screen printing mesh has high tension and low elongation, with excellent tear resistance and dimensional stability, its mesh count screen are ideal for glitter or inks, as these inks contain particles that can't pass through finer mesh. It is widely used for textiles, PCB, etc printing.   Screen Printing Mesh is one of the vital parts of screen printing, and choosing the correct mesh fabric depends on your desired printing result. We carry the largest variety of both white and dyed (yellow) screen printing mesh. All of our screen mesh is of the highest quality and you'll be sure to love it at a fraction of the price.